China's state-owned AECC has used advanced 3D printing technology to manufacture the miniature turbojet engine.
The state-owned Aero Engine Corporation of China has announced that a domestically developed, ultra-lightweight miniature turbojet engine, built primarily with 3D printing, has completed its first single-engine flight test.
This achievement marks a step for China’s independent development of aviation propulsion systems. It validates a manufacturing pathway that uses digital design and additive manufacturing to create engines.This latest test follows the engine’s initial captive-carry flight test conducted in July of this year. At that time, the engine operated up to a maximum altitude of 4,000 meters .Now, the completion of a solo flight moves the technology from a controlled test-bed scenario to an operational application.High-altitude validationDuring the test, the miniature engine powered a target drone for a 30-minute flight. In that time, it reached a maximum altitude of 6,000 meters and a speed of Mach 0.75, which is 75 percent of the speed of sound.According to the AECC, the engine operated “normally and stably” throughout the entire flight profile. This performance demonstrates the engine’s reliability at higher altitudes and in more complex, dynamic environments than it had previously faced.The solo flight validated the engine’s design and tested its compatibility and integration with the aircraft’s systems. The state-owned corporation noted the test results will inform future applications for the technology.New approaches in design and manufacturingThis engine is China’s first flight-validated turbojet in the 160-kilogram thrust class to be produced using a combination of 3D printing and multi-disciplinary topology optimization.Topology Optimization is a mathematics-based design method used in the process. Using computational models, engineers can determine the most efficient distribution of material within a defined space, given the operational loads, pressures, and constraints the part will face. This process dictates an optimal shape to ensure performance, such as stiffness, is achieved with minimal material, thereby reducing weight.The resulting intricate, web-like, and lightweight structures are frequently difficult or impossible to produce using traditional manufacturing methods like casting and forging.This is where 3D printing is used. It allows engineers to fabricate these complex geometries, layer by layer, directly from the digital model. The AECC confirmed that all rotating parts and components—which account for over three-quarters of the engine’s total weight—are 3D-printed.This combined approach has reduced the total number of parts in the engine, which in turn lowers its overall weight and simplifies its operation and future maintenance requirements.Implications for aerospace developmentThis successful flight validation provides a basis for future tests, which will target even higher altitudes and greater speeds.By integrating topology optimization with 3D printing, the AECC is developing a new manufacturing pathway. This method presents a viable alternative to conventional industrial processes that have been a challenge for China’s aerospace sector.The application of this new design and manufacturing approach is expected to shorten the development cycle for future engines. This acceleration could advance progress in development and manufacturing of high-tech aviation propulsion systems.
Inventions And Machines Propulsion System Turbojet
United States Latest News, United States Headlines
Similar News:You can also read news stories similar to this one that we have collected from other news sources.
Trial of ex-Hochul aide accused of working for China set to begin in BrooklynProsecutors say Linda Sun used her New York state job to do Chinese officials’ bidding.
Read more »
Problème de moteur: 13 000 Toyota, Lexus rappelés au Canada | Actualités automobileToyota rappelle 13 000 véhicules au Canada, dont les Lexus LX 600, GX 550 et Toyota Tundra 2023-2024, en raison d’un risque de bris moteur.
Read more »
China’s Newest Aircraft Carrier Fujian Compared to USS Gerald R. FordChina is modernizing its navy as part of efforts to challenge U.S. military supremacy.
Read more »
China pledges cooperation with Spain to tap Latin American marketsXi says Beijing is willing to collaborate with Spain on investment ventures in Latin America, calling for deeper cooperation in fields including new energy, the digital economy, and AI.
Read more »
China moves to shield rare earths from US military use: WSJDespite agreeing to relax its export controls on rare earths, China is now preparing a new licensing regime that would continue to restrict shipments to
Read more »
China tests world’s largest power-generating kite to turn upper winds into electricityChina successfully tested the world’s largest 53,800 square feet power-generating kite in Inner Mongolia, advancing its high-altitude wind energy program.
Read more »